HardieToolbox

The easy way to order James Hardie exterior products.

Go

Gallery of Homes

See homes from around the country that were built with James Hardie® products.

Go
Before You Decide:  See how James Hardie products compare to the alternatives.

Products / Weather Barrier / HardieWrap™ Flex Flashing

HardieWrap flex flashing
HardieWrap™ Flex Flashing is designed to stretch and seal around custom shapes — including windows and doorsills — to prevent water and air from entering the home. HardieWrap Flex Flashing is made of butyl rubber adhesive with a creped cross-laminated polyolefin backing and polyethylene film release. It contains no asphalts, VOCs (volatile organic compounds) or solvents, which can reduce adhesion over time.

HardieWrap Flex Flashing comes in a convenient dispenser box for easy handling and has progressive adhesion for adjustments. After a 24-hour cure period, it provides a permanent seal and protects against water damage, mildew and energy loss. While HardieWrap Flex Flashing is designed to work with the HardieWrap™ weather barrier solution, it can be used under any siding.

Together, HardieWrap™ weather barrier, HardieWrap™ Flashing, HardieWrap™ Flex Flashing and HardieWrap™ Seam Tape work with the cladding to form an important part of a home's weather protection envelope to prevent water damage, mildew and energy loss.1

1 When products are installed in accordance with relevant AAMA and ASTM standards.


Product Specifications

Total Thickness: 60 mil

Roll Sizes: 6" x 75' (2x4 construction), 9" x 75' (2x6 construction)

Packaging: Each roll is packed in convenient dispenser box

Composition: Butyl rubber adhesive; creped cross-laminated polyolefin backing; polyethylene film release

UV Stability: Up to 180 days

Application Temperature: 30°F to 180°F

Operating Temperature: -30°F to 200°F


Copyright 2010 James Hardie Building Products, Inc.